Features
Class 1W, Diamond Grade, provides a superior reflectivity where the utmost visual effectiveness is require, day and night. Available in - Standard length rolls, 45.7 metres
- Standard widths, 25mm, 50mm, 75mm, 100mm
- Colour combinations are fluoro red orange/black, fluoro lime yellow with black
- also available in non standard lengths and widths to meet special requirements.
The tape shown in this image above is class 1W Fluoro reflective.Unlike general hazard stripe tapes which are non reflective Advanced Group's Hazard Stripe Reflective Marking Tape provides day/night protection, reflective colour during the night and hi viz during the day. These Products are regularly used with - Tradesmen’s tool boxes and equipment which are used on site,
- Scaffolds, ladders, pallet jacks, barrows
- Dump bins
- Shipping containers,
- Bollards, barriers, warehousing structures and racking,
- Motor vehicles, fork lifts and allied transport,
- Traffic hazard points, inside and outside a warehouse or building.
This Product’s specific benefit is highlighting and identifying any item or possible hazard which could potentially cause an accident. The pressure sensitive form of our tape allows simple application by tradesmen or handypersons. Difficult or more involved applications may require a professional installer. Note: This tape is suitable for application to clean flat Metal (colorbond steel) substrates. It may also be applied to other surfaces but technical advice should be sought prior to application. Advanced Group's Hazard Stripe Reflective Marking Tape is available in three qualities Class 2, Engineer Grade, for general purpose highlighting. Available in - Standard length rolls, 45.7 metres
- Standard widths, 25mm, 50mm, 75mm, 100mm
- Available in colour combinations White/Red, White/Blue, Red/Yellow, Black/Yellow, White/Green, White/Orange
- Customised length and width rolls can be supplied.
Class 1 Grade, where a greater level of reflectivity is required. Available in - Standard length rolls, 45.7 metres
- Standard widths 25mm, 50 mm, 75mm, 100mm
- Colour combinations are white/red, yellowithblack, yellowithred
- Special lengths and widths can be supplied to meet special needs
Class 1W, Diamond Grade, provides a superior reflectivity where the utmost visual effectiveness is require, day and night. Available in - Standard length rolls, 45.7 metres
- Standard widths, 25mm, 50mm, 75mm, 100mm
- Colour combinations are fluoro red orange/black, fluoro lime yellow with black
- also available in non standard lengths and widths to meet special requirements.
|
