45.7m. 3M High Intensity ScotchLite™ Reflective Tapes 
- Choose the width & colour required
Quality Pressure Sensitive Adhesive Hazard Stripe Reflective
Marking Tape is used to highlight possible hazards which could impact on
worker safety.
This products specific benefit is
highlighting and identifying any item or possible hazard which could
potentially cause an accident. The pressure sensitive form of our tape
allows simple application by tradesmen or handypersons. Difficult or more involved applications may require a
professional installer.
Note: This tape is suitable for
application to clean flat Metal (colorbond steel) substrates. It may also be applied to
other surfaces but technical advice should be sought prior to
application.
Advanced Road Signs & Safety's Hazard Stripe Reflective Marking Tape is available in three qualities
| Class 2
| Class 1 Grade
| Class 1W
|
Engineer Grade, for general purpose highlighting. |
Where a greater level of reflectivity is required.
|
Diamond Grade,
provides a superior reflectivity where the utmost visual effectiveness
is require, day and night. |
- Standard length rolls, 45.7 metres
- Standard widths, 25mm, 50mm, 75mm, 100mm
- Available in colour combinations White/Red, White/Blue, Red/Yellow, Black/Yellow, White/Green, White/Orange
- Customised length and width rolls can be supplied.
|
- Standard length rolls, 45.7 metres
- Standard widths 25mm, 50 mm, 75mm, 100mm
- Colour combinations are white/red, yellowithblack, yellowithred
- Special lengths and widths can be supplied to meet special needs
|
- Standard length rolls, 45.7 metres
- Standard widths, 25mm, 50mm, 75mm, 100mm
- Colour combinations are fluoro red orange/black, fluoro lime yellow with black
- Also available in non standard lengths and widths to meet special requirements.
|
Advanced Group's 3M Reflective Tapes
|
|
|
Unlike
general hazard stripe tapes which are non reflective Advanced Group's Hazard Stripe
Reflective Marking Tape provides day/night protection, reflective
colour during the night and hi viz during the day. These products are regularly used with
- Tradesmens tool boxes and equipment which are used on site,
- Scaffolds, ladders, pallet jacks, barrows
- Dump bins
- Shipping containers,
- Bollards, barriers, warehousing structures and racking,
- Motor vehicles, fork lifts and allied transport,
- Traffic hazard points, inside and outside a warehouse or building.
|
|
|
