Line Marking Paint [Solvent Based] -Bulk
Solvent-Based Line Marking Paint is a chlorinated rubber
modified, alkyd-based paint designed for application over asphalt, tar sealed
and concrete surfaces. The product dries fast resulting in minimal traffic
holdup. The paint is easy to apply and available in a range of commonly used
colours.
DIRECTIONS FOR USE DIRECTIONS FOR USE
Preparation
Ensure that area to be marked is free from dust and all
loosely adhered material. Wipe off contaminants such as oil and grease. The
surface should be fully dry before application of the product.
Application
Stir the contents thoroughly using a broad paddle. Thin with
a maximum of 5% Mineral Turps or general paint thinner if required (depending
on weather conditions). Apply a uniform coat using preferred method of
application, ensuring adequate build-up of film.
TECHNICAL DATA
Size: 4
Litre, 20 Litre Size:
Finish: Matt
Colour: Black,
Red, Blue, Green, Yellow, Orange, White, Grey
Consistency: Liquid
Theoretical
Coverage: 2.5 sqm /
litre (at 200 microns Theoretical Coverage: dry film thickness). Actual
coverage may depend on surface profile, method of application and losses
Suitable Surfaces: Asphalt, concrete and tarsealed
surfaces
Solvent Resistance: Film is sensitive to alcohol and
aromatic hydrocarbons
Drying Time: Touch dry: 5 minutes Recoat: after
2 hours Cooler temperatures,
(at 25°C &
RH 60%) humid conditions
or a higher film thickness will require a longer drying time
Ideal
Application Temperature: Between
10°C and 40°C
Solvent for
Thinning & Clean Up: Mineral Turps or general paint thinner
